Neware Battery Testing System CT-4008Q 5V100mA 4 Range

฿68,900.00


BATTERY TESTING SYSTEM

NEWARE CT-4008Q
5V100mA

8 channels4 ranges±0.02% FS
  • Independent cell testing across 0.2 μA–100 mA.
  • CC/CV cycling, pulse operation and DCIR evaluation.
  • Four-wire acquisition and software-controlled testing.
Confirm the hardware revision, mains option and controller package before ordering.
SKU: N/A Category: Brand:

BATTERY CHARACTERISATION

NEWARE CT-4008Q
5V100mA Battery Testing System

Product Introduction

  • Computer-controlled battery cycler with independent constant-current and constant-voltage channels.
  • For coin, cylindrical and pouch-cell evaluation.

Testing Capabilities

  • Charge: CC, CV, CC–CV and constant power.
  • Discharge: CC, CV, CC–CV, constant power and constant resistance.
  • DCIR point selection and dQ/dV analysis.
  • Offline operation, power-loss data retention and configurable protection limits.

Four Current Ranges

Range Current / channel CV cutoff
1 0.2 μA–0.1 mA 0.1 μA
2 0.1–1 mA 1 μA
3 1–10 mA 10 μA
4 10–100 mA 0.1 mA

Technical Specifications

Parameter Listed value
Model CT-4008Q-5V100mA
Channels 8; independently controlled
CV control 10 mV–5 V
Minimum discharge voltage −5 V
Voltage/current accuracy ±0.02% FS
Voltage/current stability 0.04% FS
Power/channel 0.5 W maximum
Input power 40 W
Conversion ADC 24-bit; DAC 16-bit
Input impedance ≥1 GΩ
Current response ≤1 ms (10–90% FS)
Recording 100 ms minimum; 10 Hz
Pulse 500 ms minimum; up to 32 patterns/step
Cycling 65,535 cycles; 254 steps; 10 nesting levels
Acquisition Four-wire connection
Protection rating IP20
Noise <45 dB
Leakage 0.005 μA

Software & Configuration

  • TCP/IP communication; MySQL data storage.
  • Excel and TXT export; Windows 7/10 or later listed.
  • 110 V / 220 V configurations; packages with or without the communication controller (“middle machine”).
  • Extra coin-cell clamps available separately.

Selection & Enquiry

  • Share your cell format, expected current, test protocol and number of channels with SPARX.
  • Confirm mains rating, communication-controller inclusion, software compatibility and fixtures before ordering.
  • FS means full scale, not percentage of the reading. Confirm how accuracy is specified for each selected range.

Email SPARX about CT-4008Q

  • Specification basis: This page follows the linked MSE configuration. A separate manufacturer document for the -124 variant differs; confirm the exact supplied revision before purchase.

References: MSE product listing · manufacturer -124 document. Checked 18 September 2026.

MODEL

CT-4008Q 5V100mA, CT-4008Q 5V10mA, CT-4008Q 5V20mA, CT-4008Q 5V50mA

Reviews

There are no reviews yet.

Be the first to review “Neware Battery Testing System CT-4008Q 5V100mA 4 Range”

Your email address will not be published. Required fields are marked *